Porsche Panamera Turbo S 971Hatchback · 4.0 litre · 463 kW

Aug 2020 onward · Hatchback · Petrol · 3,996 cc

Engine, fluids, brakes, wheels and tyres, bulbs, battery and wipers for this car.

Porsche Panamera (971) hatchback

Oil & fluids

Brake fluid

DOT 4

Quantities and approvals as listed for this vehicle. Check the level after filling; a capacity is not a top-up amount.

Engine & drivetrain

Engine code

DTCA

  • 3,996 cc · 8 cylinders · 32 valves
  • Direct injection

Drive

All-wheel drive

Brake discs

AxleDisc sizeTypeMinimum thicknessApplies to
Front 350 × 34 mm Vented 32 mm All versions
Rear 330 × 28 mm Vented 26 mm All versions

Size is diameter × thickness. Replace a disc before it wears to its minimum thickness, which is also marked on the disc itself. Where two sizes are listed for one axle, the car's equipment decides which it has: measure the disc to be sure.

Wheels & tyres

Stud pattern

5 × 130

  • Number of bolts × circle diameter (mm)

Factory wheel and tyre sizes

WheelTyre sizeRimFitted to
20-inch 275/40 R20 9.5J × 20, offset ET71 Front
20-inch 315/35 R20 11.5J × 20, offset ET68 Rear
21-inch 275/35 R21 9.5J × 21, offset ET71 Front
21-inch 325/30 R21 11.5J × 21, offset ET69 Rear
21-inch 315/30 R21 10.5J × 21, offset ET71 Rear

Sizes the parts catalogue lists for this car. A "Rear" row is the wider rear tyre on cars with different sizes front and rear. Your tyre placard, on the driver's door pillar, gives the sizes and pressures for the wheels your car was built with.

Engine, gearbox, brake, wheel, tyre, bulb, battery and plug details are taken from the parts makers' listings for this exact vehicle. Where those listings disagree, only the clear majority is shown.

Wiper blade sizes & fittings

Right-hand drive

Check your vehicle's build month and arm fitting against the rows below.

Build dateBlade sizesAttachment / clipMatching blades
Aug 2020 onwardRear 330 mm—Bosch AM 33 H, Bosch A 332 H

From Bosch's Australian wiper catalogue, for right-hand-drive vehicles. Match the build month, the existing arm connector and any fitting conditions before ordering.